Lost Time Injury Frequency Rate (LTIFR) is one of the most widely reported occupational safety KPIs internationally. It counts lost-time injuries per million hours worked, making large and small workforces comparable.
A lost-time injury usually means the person could not return to their next scheduled shift. Confirm whether your company counts restricted-work cases separately (as in DART) or folds them into a broader “lost time” definition.
Key points
Before you run the numbers, keep these rules of thumb in mind — they prevent the most common reporting mistakes.
- LTIFR targets on tenders mean nothing without a shared definition.
- Audit classifications if LTIFR falls while first-aid and restricted work rise.
- Report severity or days-lost beside LTIFR.
- Include fatalities in LTIFR and also report a separate fatality rate.
Formula
LTIFR is the international lost-time frequency rate: lost-time injuries per million hours worked. Confirm whether your company treats restricted work as separate (DART-style) or folds it into “lost time”.
Formula. LTIFR = (Lost time injuries × 1,000,000) ÷ Hours worked
Used by project and corporate HSE teams reporting LTIFR to clients and boards.
Variables explained
Each term in the equation must use the same reporting period and workforce boundary.
| Symbol / input | What to enter |
|---|---|
| Lost time injuries | Cases where the person could not return to the next scheduled shift (per your definition). |
| Hours worked | Workforce hours matching the LTI scope. |
| 1,000,000 | Standard international frequency base (switch to 200,000 only when converting to OSHA-style case rate). |
How to use this calculator
Count LTIs under one definition, match hours to that scope, then keep the million-hour base unless a client explicitly wants the OSHA-style case rate.
1. Count LTIs
Injuries meeting your lost-time definition in the period. One person, one event = one LTI case for frequency purposes.
2. Enter hours worked
Workforce hours matching the LTI scope (employees only vs employees + contractors).
3. Optional OSHA-style base
If you need a 200,000-hour lost-time case rate instead, use the Lost Time Case Rate calculator — or switch the multiplier here for a like-for-like conversion.
Interpreting the result
LTIFR is easy to game and easy to misunderstand. Read it with TRI, HiPos and severity — and with honest classification audits.
| Metric | What it counts | Usual base |
|---|---|---|
| LTIFR | Lost-time injury cases | 1,000,000 |
| Lost time case rate | Lost-time cases | 200,000 |
| TRIFR / TRIR | Recordable cases | 1,000,000 / 200,000 |
| Severity rate | Days lost | 200,000 |
Industry context
LTIFR targets of <1.0 or <0.5 appear in many contractor scorecards. Understand the client’s definition before you bid or report.
Complement with TRI and HiPos
Sites can drive LTIFR down by reclassifying injuries or rushing return-to-work. Audit classifications and track high-potential near misses honestly.
- Sample first-aid vs recordable borderline cases each quarter.
- Track restricted-work cases even if they are outside LTIFR.
Worked example
Two lost-time injuries occur in 500,000 hours on a construction project.
- LTIs = 2
- Hours = 500,000
- LTIFR = (2 × 1,000,000) ÷ 500,000 = 4.0
Report LTIFR = 4.0 per million hours, with the project’s LTI definition in the footnote.
| Input / result | Value |
|---|---|
| Lost time injuries | 2 |
| Hours worked | 500,000 |
| LTIFR | 4.0 |
Frequently asked questions
Answer these before you put LTIFR on a tender return or monthly client report.
What is a good LTIFR?
World-class heavy industry often aims well below 1.0, but “good” depends on sector, definition and honesty of reporting. Trend your own performance and investigate every LTI for systemic causes.
LTIFR vs LTISR?
LTIFR is frequency (how often). LTISR / severity rates measure days lost. Report both for a complete picture.
Does LTIFR include fatalities?
A fatal injury is a lost-time injury and is normally included in LTIFR, with a separate fatality rate also reported.
Disclaimer. These calculators support training and internal KPI arithmetic. They are not legal advice, medical advice, or a substitute for your organisation's procedures, applicable standards, or a competent person's judgement. Confirm definitions and multipliers against your SMS and the code of record before reporting externally.
Related tools
Use these calculators alongside this one when you need a fuller safety-performance picture.
- TRIFR Calculator (Total Recordable Incident Frequency Rate) — Total recordable injury frequency per million (or 200,000) hours worked.
- Lost Time Case Rate Calculator — Lost-time injury cases per 100 full-time equivalent workers.
- Severity Rate Calculator — Measure days lost to injury per 100 full-time workers (200,000 hours).
- Accident Frequency Rate Calculator — Standardise accident counts per hours worked for site and contractor comparisons.